Proper use of vibrating feeder
When one stone crushing plant is built, producers are caring about the production cost. High quality machines are the premise of building one low cost mining processing line. But some problems that lead to the breakdown will greatly increase the production costs. For example, breakdown caused by operators’ unseemly operation, caused by foreign body that appear in the machine and caused by heavy current suddenly and some other factors. So good maintenance is good for reduce the cost of mining processing plants. Vibrating feeder, the crushing equipments installed in the front of the whole crushing plants, play an important part in keeping the plant work. The maintenance work is very important.
When the machines are ready to be shipped to the customers, there is some lubrication oil filled in the vibration generator. If the machines are not used for 3 months, operators have to change some clean lubrication oil to start operating the machines.
The temperature of bearing should not be higher than 70 degree. Due to the first running of vibrator, the temperature may a little higher, after 8 hours running, the temperature should be smoothly, or operators need to check the type of oil, and also its level and cleanness.
When the V-belt is needed to be changed, operators should loose the foundation bolt of electric motor completely, and put the V-belt into the groove pulley. Sticks and some other objects are not allowed. The tension of V-belt must be suitable and the belt pulley has to be in the correct place. Please re-adjust the tension after 48 hours running,
These bolts which used between vibrator and main body are high-strength bolts, operators can not use normal ones, Inspect them every month at least one time.
When disassemble the vibrator, please take down from outer parts to inner parts one by one, take care of the components and avoid being damaged, and clean the components them one after another. If some components are damaged please change and repair them on time.
Good maintenance is able to reduce the opportunity of breakdown and reduce the production cost .But it can not avoid the chance of breakdown, so when the questions happen, operators can check according to the maintenance principle, and if it is caused by some unknown problems, get in touch with the manufacturer. Gulin, the professional vibrating feeder, has various vibrating feeders. These vibrating feeder well satisfy the customers’ demands and get high reputation from them. If you have the demands of vibrating feeder or if you have troubles, just be free to contact us. You can chat with our engineers on-line or you can leave your email with us, we will answer you within 24 hours.